Temporary Fencing Rental Connecticut | Installed Fast and Secure

If you’re running a job site in Connecticut, you know the perimeter is the first thing that goes up and the last thing that comes down. For professional temporary fencing rental in Connecticut, trust the local experts at Connecticut Scaffolding. 

Connecticut Scaffolding manages the full rental process. We deliver, install, and remove chain-link, crowd control, and anti-climb barriers across all 8 counties. Our crews set the line from Stamford to Putnam, so you can focus on the build.

Get a 24-hour project quote. Call us (475) 231-6743 or email contact@connecticutscaffolding.com.

OSHA-10 Certified Crews

22 Years of Experience

No-dig setups available

Fully licensed, bonded & insured ($2M+)

Serving every CT town

Why Contractors Trust Us

We have been fencing and scaffolding Connecticut job sites since 2004. You get a crew that knows the local codes and shows up on time. Here is how we work: 

  • CT-licensed, bonded & insured, $1M+ general liability.
  • 600+ job sites secured across all 8 counties.
  • 24-hour quote turnaround with same- or next-day delivery on stock items.
  • OSHA-trained install crews who set the line and handle the teardown.

Temporary Fencing Rental Connecticut | Equipment Options

Most Connecticut projects use one of four fence types. Here’s how they differ, so you order the right one the first time.

Crowd Control Barrier: Pedestrian and Event Control

An anti-climb fence is a welded-mesh steel panel with tight ~2-inch apertures that deny hand- and foot-holds, making it far harder to scale than standard chain-link.

It’s the right call when theft, vandalism, or unauthorized access is a real risk. The tight mesh removes the toeholds a determined climber would otherwise use.

Best for: Utility substations, high-value equipment storage, vacant-property securing, and sensitive infrastructure.

Privacy Fence Panel: Site Screening

A privacy fence panel is a standard chain-link panel fitted with a solid screen or printed scrim.

It blocks sightlines into the work zone, cuts windblown dust and debris, and gives you a clean surface for company or project signage. Useful anywhere the site needs to stay visually contained.

Best for: Demolition sites, urban infill projects, and any site that needs visual screening or dust control.

Anti-Climb Fence: High-Security Sites

An anti-climb fence is a welded-mesh steel panel with tight ~2-inch apertures that deny hand- and foot-holds, making it far harder to scale than standard chain-link.

It’s the right call when theft, vandalism, or unauthorized access is a real risk. The tight mesh removes the toeholds a determined climber would otherwise use.

Best for: Utility substations, high-value equipment storage, vacant-property securing, and sensitive infrastructure.

Compare Temporary Fence Types

Fence Type

Height

Best Use

Security Level

No-Dig Setup

Chain-Link Panel

6’ (8’ available)

Construction perimeters & yards

Standard

Yes (block bases)

Crowd Control Barrier

~40″

Events & pedestrian lines

Foot-traffic only

Yes (free-standing)

Privacy Panel

6′

Screening & dust control

Standard + screening

Yes (block bases)

Anti-Climb Mesh

6′

High-security perimeters 

Anti-climb, high security 

Yes (block bases) 

Cost depends on run length, rental term, and location. Call (475) 231-6743 for a firm same-day quote.

Connecticut Use Cases

Contractors, towns, and event teams across the state rent temporary fencing from us for jobs like these:

Active construction perimeters:

In dense areas like Stamford and New Haven, no-dig block bases let you fence right up to a sidewalk or pavement edge.

Outdoor event security:

Agricultural fairs, municipal festivals, and town green events. Crowd control barriers for foot traffic, panel fence for back-of-house and equipment.

Utility & roadway work zones:

Separating crews and open excavations from busy traffic corridors along the I-95 and I-91 routes.

School-zone construction safety:

Keeping students and staff clear of active work during summer and phased builds.

Demolition site containment:

Privacy screen controls dust and debris while the fence line locks the hazard area down.

Vacant-property securing:

Anti-climb mesh deters trespassing, dumping, and liability on idle lots and stalled developments.

Rental Process & Statewide Coverage

Four simple steps from quote to clean pickup. Your crew never touches the fence line.

  1. Quote. Send your site dimensions, fence type, and dates. We calculate exact linear footage and price it the same day.
  2. Delivery & install. Our crew delivers across Connecticut, often same-day or next-day, and sets your fence line, bases, and gates.
  3. On-site support. Need to expand, move, or reconfigure mid-project? We handle changes so your perimeter keeps pace with the job.
  4. Pickup. When the project wraps, we remove everything and leave the site clean. No teardown for your crew.

 

We rent to all 8 Connecticut counties: Fairfield, Hartford, New Haven, New London, Litchfield, Middlesex, Tolland, and Windham, from the I-95 coastal corridor to the I-91 interior. Same crews, same standards, every town.

Need Fencing and Jersey Barriers? Bundle and Save.

Most Connecticut construction sites need both services:

  • Temporary fencing to keep people out
  •  Jersey barriers to stop vehicles

Fencing screens the site and controls foot traffic; concrete or water-filled barriers provide the impact protection that fencing can’t. Order both in a single delivery and we’ll roll them into one combined quote: fewer trucks, less coordination, lower delivery cost.

MASH TL-3 and CTDOT Barrier Compliance

Connecticut state-road work requires a CTDOT Encroachment Permit under C.G.S. § 13a-247 and § 13b-17. We engineer every deployment to satisfy these local and state inspectors, ensuring your project passes review on the first visit.

  • Engineering Standards: Every setup follows MUTCD and OSHA Subpart G rules. Our concrete inventory is crash-tested to MASH (AASHTO) Test Level 3. These units are built to redirect cars and trucks at impact speeds up to roughly 62 mph. That’s the federal benchmark for highway and state-funded roadwork.
  • Engineering Oversight: We provide Connecticut-licensed PE-stamped plans for complex barrier runs, matched to your exact permit requirements.
  • F-Shape Profile: Our F-shape units are built to redirect vehicles and cut down the risk of vaulting in a high-speed hit.
  • End Treatments: For every MASH TL-3 highway job, we spec the right crash cushions to match your barrier run and traffic speed.

Why Connecticut Scaffolding?

Real site safety takes more than equipment. It takes an engineering-first plan.

Same-Day Mobilization for CTDOT Projects

Our inventory is staged locally, so emergency deployments often happen within hours, not days. That matters when a contractor is dealing with a utility failure, road damage, or a surprise lane closure.

Infrastructure-Hardened Logistics

From night-shift I-95 closures to tight urban perimeters, our crews are trained for off-peak, high-traffic setups. Barriers go in, get pinned, and pass inspection before the morning commute.

Trusted by CT Municipalities & GCs

We've run overnight closures on I-95, I-91, and I-84. Public works departments and highway GCs both get PE-stamped plans before the truck shows up, not after.

Proven on the Corridor (I-95 Resurfacing, Stamford)

We managed site security and traffic separation for an 18-month resurfacing project that ran two weeks ahead of schedule with zero incident reports.

Site Access Checked Before We Mobilize

Before we mobilize, our team checks turning radii and staging space against your site plan. We resolve any access issues before the truck leaves our yard.

Get a 24-Hour Quote

Tell us what you’re fencing. Send your project details and we’ll confirm stock, recommend the right panel or barrier, and price it the same day. 

We are your dedicated partner for temporary fencing rental in Connecticut, providing exact linear-footage pricing, OSHA-certified crews, and same-day mobilization to keep your project compliant and safe.

Call us (475) 231-6743 for the fastest same-day service.

Frequently asked questions

Every project is priced individually based on your site’s specific layout, run length, and rental duration. We provide custom quotes rather than flat rates, ensuring that your installation, delivery, and removal are clearly itemized. This transparency allows you to budget for your site’s unique security needs without hidden overhead. Call (475) 231-6743 for a project-specific estimate. 

Our standard chain-link panels are 6 feet tall by 12 feet wide. For high-security projects, we also stock 8-foot tall by 10-foot wide panels and anti-climb welded mesh.

For fencing on private property or inside an active job site, you typically do not need a permit. If the fence occupies a public sidewalk, parking lane, or state-road right-of-way, a town permit or a CTDOT Encroachment Permit may be required. We can help you identify which applies.

Absolutely. We use weighted concrete and heavy-duty rubber block bases, which is the standard for construction sites in dense areas like New Haven or Hartford. We lock the panels together with clamps to make sure there are zero holes in your asphalt / concrete. 

We offer same-day or next-day delivery on almost all stock items. If you have an emergency security need, call us immediately. We can move a crew to get your perimeter set before the end of the day.

Most of our construction rentals run monthly, billed per linear foot. For events and short-term security, we rent by the week or the weekend. Tell us your dates and we will price the term that fits your needs.

Yes. We fit pedestrian gates and double-drive vehicle gates into any panel run, so crews and equipment get in and out without breaking the perimeter. Tell us where you need access and we will set the openings during install.

Delivery, install, and removal are quoted alongside the rental so you see the full number up front. There are no surprise line items. The per-linear-foot rate covers the fence, while delivery and install are calculated from your site location and run length and confirmed in the same-day quote.